The parts
For this quadcopter, I ordered all of my components from HobbyKing with the exception of the frame which I had 3D-printed. Below is a list of links to all of the parts I used to build this quadcopter as well as a link to the 3D model of the frame. It's important to keep in mind that I did not buy all of these components for this build specifically. I had a lot of these components lying around from previous projects.
1 x 3D Printed Frame
4 x Turnigy 2900KV Brushless Motors 4 x Turnigy 6A ESC's 1 x KK2 Controller Board 2 x 5030 Red Propellors 2 x 5030 Black Propellors 1 x FrSky VD5M Micro Receiver 2 x Micro Servo Connectors 1 x Futaba Servo Terminals 2 x Turnigy NanoTech 1000Mah 2 Cell LiPo 1 x Turnigy Red 24AWG Silicone Wire 1 x Turnigy Black 24WAG Silicone Wire 1 x TEKTON Assorted Zip Ties 5 x Black 5/8" Heat Shrink Tubing 1 x M2 x 8 Self Tapping Screw Set For anyone who uses Autodesk Inventor, below is the part file I made for the 3D printed frame. It is saved as an "ipt." You can also download the STL file from Thingiverse.
|